Skip to content
3PL Fulfillment

Amazon FBA prep requirements: a checklist before you ship

CHECKLISTS · BY 3PL FULFILLMENT TEAM · UPDATED NOVEMBER 16, 2026 · 3 MIN READ

Close-up of a worker taping a cardboard box with a tape dispenser

Amazon FBA shipments are checked against Amazon's packaging and shipping rules, and shipments that miss them can be rejected or reworked. Since January 1, 2026, Amazon no longer does the prep for US FBA shipments, so you or a prep center have to get it right. This checklist covers the rules that sellers miss most often.

Always confirm the details on Amazon's own pages: Product packaging requirements and Shipping and routing requirements. Rules change.

Hands sealing a cardboard box with red tape

1. Every unit has a scannable barcode

Each unit needs a barcode Amazon can scan, either the manufacturer barcode or an FNSKU label, depending on your setting in Seller Central and Amazon's current rules. If a unit needs an FNSKU, it needs a label on every unit. Read FNSKU vs UPC to see which applies.

2. Poly bags have the right warning

Poly bags with an opening of 5 inches or more, measured flat, need a suffocation warning. The warning can be printed on the bag or applied as a label. Check Amazon's packaging page for the current wording and sizes before you buy bags. Sealed, clear bags also let the barcode scan through the bag.

3. Products are protected

Items need packaging that protects them in transit. That means sealed units where loose parts could spill, secured padding for fragile items and nothing that can open on its own. If a product could be damaged by a normal drop, pack it as if it will be dropped.

4. Cartons stay within the limits

Amazon's shipping and routing page says a box can be at most 25 inches on any side and at most 50 lb, unless it holds a single oversize item. Boxes heavier than 50 lb need team-lift (heavy package) labels on the top and sides. Some third-party sites report different limits, so use Amazon's page as the reference.

5. Every box has a box ID label

Each box in a shipment needs its own FBA box ID label, in addition to the carrier label. Put it on a flat surface and not over a seam, so it scans.

6. Other barcodes on cartons are covered

Old shipping labels and barcodes left on a reused carton can confuse scanning. Cover or remove them so only the correct labels are visible.

7. Counts match the shipment plan

The units in each box should match what you entered in your shipment plan. A count mismatch slows check-in. Count when you pack, not after.

What a prep center does with this list

A prep center runs this checklist on every shipment: receiving and counting the stock, inspecting it, applying labels, packing to the carton limits and applying box ID and shipping labels. See what that includes on our Amazon FBA prep page, or read what is an Amazon prep center.

Do it yourself or hand it over?

If you send a few units a month and have room, doing it yourself can work. If you send stock in bulk, a per-unit price for prep may cost less than your time and space. Our prep starts at $1.50 per unit. Request a quote with your product list.

Mistakes that cause rejected or reworked shipments

  • Labeling before you check the barcode setting for the offer.

  • Using poly bags with no suffocation warning when the opening is 5 inches or more.

  • Packing a carton over 25 inches on a side or over 50 lb when it does not hold a single oversize item.

  • Forgetting the box ID label on one box of a multi-box shipment.

  • Counting after packing instead of during packing, so the shipment plan no longer matches.

  • Amazon poly bag requirements: the 5-inch suffocation rule

More guides

Tell us what you are sending.

Send your product types, monthly units and the marketplace you sell on. We reply with a quote.

Get a quote

Get a quote

Five quick questions. We reply with a quote by email.

We use your details only to reply to this request.

Want to add more detail? Use the full quote page